This project refers to an Arduino sketch that implements an Arduino Web Controller. Basically, the Arduino works as a network device that can be configured either locally or remotely by a special WEB interface. This technology is not new as it exists in other network devices. For example, routers or network printers are configured through a WEB interface.
This project refers to a sketch (an Arduino program) in which you have the ability to run applications with the help of an infrared receiver (IR) and a remote control. Also included in this project is a Python script that implements a background service (Daemon) which communicates with the Arduino and initiates the execution of various applications. The program can manage several remote controls following the communication protocols NEC, Sony SIRC, Philips RC5 and Philips RC6. Also, you are given the opportunity to train the software to respond to specific keys from several remotes (the knowledge is recorded in the EEPROM of the Arduino).
This project refers to an Arduino sketch which with the help of a relay (electromechanical switch), the system VRBot and the expansion card for sensors (Sensor Shield) can control (enable or disable) an external device (eg. a lamp, a car alarm, a home air conditioner, etc.) with a double beat of the palm.
This project refers to an Arduino sketch that implements an online Morse Code web encoder. The Morse Code is until now a global communication system. However, it is now rarely used (it has been previously extensively used in the Navy and the Army in general). In this project, the Arduino works as a server, which remote clients can be connected to with the help of TCP sockets and send occasional messages on a regular alphanumeric form.
For example: “SOS! USA NAVY (12/02/1920, 23:00)”